Supero SUPERSERVER 6016T-NTF, User Manual

Page: 95 / 120

Chapter 7: BIOS
7-7
C1E Support
Select Enabled to use the feature of Enhanced Halt State. C1E signi fi cantly reduces
the CPU's power consumption by reducing the CPU's clock cycle and voltage during
a "Halt State." The options are Disabled and
Enabled
.
Intel® C-STATE Tech
If enabled, C-State is set by the system automatically to either C2, C3 or C4 state.
The options are Disabled and
Enabled
.
C-State package limit setting
If set to Auto, the AMI BIOS will automatically set the limit on the C-State package
register. The options are
Auto
, C1, C3, C6 and C7.
C1 Auto Demotion
When enabled, the CPU will conditionally demote C3, C6 or C7 requests to C1 based
on un-core auto-demote information. The options are Disabled and
Enabled.
C3 Auto Demotion
When enabled, the CPU will conditionally demote C6 or C7 requests to C3 based
on un-core auto-demote information. The options are Disabled and
Enabled.
DCA Technology
Select Enabled to use Intel's DCA (Direct Cache Access) Technology to enhance
data transfer ef
fi ciency. The options are
Enabled
and Disabled.
DCA Prefetch Delay
A DCA Prefetch is used with TOE components to prefetch data in order to shorten
execution cycles and maximize data processing ef
fi ciency. Prefetching too fre-
quently can saturate the cache directory and delay necessary cache accesses. This
feature reduces or increases the frequency the system prefetches data. The options
are [8], [16],
[32]
, [40], [48], [56], [64], [72], [80], [88], [96], [104], [112], [120]

Advanced Chipset Control
The items included in the Advanced Settings submenu are listed below:

QPI & IMC Confi guration
QuickPath Interconnect (QPI) is the connection between the CPU and the
motherboard's I/O hub. Use this feature to modify speed and power manage-
ment settings.