Supero SUPER S2QE6, User Manual

Page: 75 / 92

Chapter 4: BIOS
4-17
BIOS
Overheat Warning Temperature
Use this option to set the CPU overheat warning temperature. The
settings are
25 °C
through
75 °C
in 1 °C intervals.
Note: The Optimal
and Fail-Safe default settings are 55 °C
.
H/W Monitor CPU1
H/W Monitor CPU2
H/W Monitor CPU3
H/W Monitor CPU4
H/W Monitor (+3.3V)
H/W H/WMonitor (+5V)
H/W Monitor (+12V)
H/W Monitor (+2.5V)
CPU1 Fan
CPU2 Fan
CPU3 Fan
CPU4 Fan
The above features are for PC Health Monitoring. The motherboards with
W83781D have seven onboard voltage monitors for the CPU core, CPU I/
O, +3.3V, +5V, -5V, +12V, and-12V, and for the four-fan status monitor.
OnBoard FDC
This option enables the FDC (Floppy Drive Controller) on the motherboard.
The settings are
Disabled
and
Enabled
.
OnBoard Serial Port1
This option specifies the base I/O port address of serial port 1. The
settings are Disabled , 3F8h , 2F8h , 3E8h and 2E8h .
OnBoard Serial Port2
This option specifies the base I/O port address of serial port 2. The
settings are Disabled , 3F8h , 2F8h , 3E8h and 2E8h .
Serial Port2 Mode
The settings for this option are
Normal, IrDA SIR-A,. IrDA SIR-B,
ASKIR, Consumer
and
Raw IR
. When set to anything but
Normal,
the IR Duplex Mode becomes available and can be set to
either Half or Full .