Supero SUPER S2QE6, User Manual

Page: 41 / 92

Chapter 2: Installation
2-13
Installation
Keyboard Lock
The Keyboard Lock connection is
located on pins 22 and 24 of JF1.
See Table 2-11 for pin definitions
and Figure 2-5 for pin locations.
Table 2-11
Keyboard Lock
Pin Definitions
(JF1)
Pin
N u m b e r
2 2
2 4
Definition
Kybd Inhibit
G N D
Reset
The Reset connection is located
on pins 15 and 17 of JF1. This
connector attaches to the hard-
ware reset switch on the com-
puter chassis. See Table 2-9 for
pin definitions and Figure 2-5 for
pin locations.
Pin
N u m b e r
1 5
1 7
Definition
R e s e t
G r o u n d
Table 2-9
Reset Pin
Definitions
(JF1)
Chassis Intrusion (CI)
A Chassis Intrusion connection is
located on pin 20 of JF1. If a
chassis intrusion condition has
been detected, a message will be
sent to notify the system adminis-
trator. See Table 2-10 for pin defi-
nitions and Figure 2-5 for pin loca-
tions.
Pin
N u m b e r
2 0
Definition
Intrusion Input
Table 2-10
Chassis Intrusion (CI)
Pin Definitions (JF1)
Extra Universal Serial Bus
Connection (USB0)
An additional connection for USB0
is included on pins 25, 27, 29 and
31 of JF1 for front side USB ac-
cess. You cannot have devices
connected to both this and the up-
per port on U25. See Table 2-12
for pin definitions and Figure 2-5
for pin locations.
Note: You will need a USB cable (not included)
to use this connection.
Pin
N u m b e r
2 5
2 7
2 9
3 1
Definition
+ 5 V
P O -
P O +
G r o u n d
Table 2-12
USB0 Pin
Definitions (JF1)