Supero SUPER S2QE6, User Manual

Page: 47 / 92

Chapter 2: Installation
2-19
Installation
Overheat Buzzer Alarm
Enable/Disable
JP56 gives you the option of dis-
abling the audio alarm signal that
notifies you of power failure, fan
failure and overheat conditions. If
disabled, you will still be notified
of such conditions by the LED cor-
responding to the fault. The de-
fault setting is enabled. See Table
2-25 for jumper settings.
J u m p e r
Position
O p e n
C l o s e d
Definition
D i s a b l e d
E n a b l e d
Table 2-25
Overheat Alarm
Enable/Disable
Jumper Settings (JP56)
BIOS Select
(Dual BIOS is optional)
The S2QR6/S2QE6 has two BIOS
chip sockets to provide a backup
(backup chip optional) if the BIOS
becomes corrupted. Switching
from one BIOS chip to the other is
done manually with jumper JP57.
BIOS chip #1 is the default setting.
See Table 2-27 for jumper set-
tings.
J u m p e r
Position
1-2
2-3
Definition
B I O S 1
B I O S 2
Table 2-27
BIOS Select
Jumper Settings (JP57)
Onboard LAN/NIC
Enable/Disable
Change the setting of jumper JP58
to enable or disable the onboard
LAN or NIC (Network Interface
Card) on your motherboard. See
Table 2-28 for jumper settings.
J u m p e r
Position
O p e n
C l o s e d
Definition
E n a b l e d
D i s a b l e d
Table 2-28
Onboard LAN/NIC
Enable/Disable
Jumper Settings (JP58)
CMOS Clear (S2QE6 only)
Refer to Table 2-26 for setting
JBT1 to clear CMOS. Always re-
move the AC power cord from the
system before clearing CMOS.
Table 2-26
CMOS Clear Jumper Settings
(JBT1)
J u m p e r
Position
1-2
2-3
Definition
N o r m a l
C M O S C l e a r