Supero SUPER S2QE6, User Manual

Page: 66 / 92

S
UPER S2QR6/S2QE6 Manual
4-8
BIOS
BIOS turns off the Num Lock key when the system is powered on. This
will enable the end user to use the arrow keys on both the numeric
keypad and the keyboard.
PS/2 Mouse Support
Settings for this option are Enabled or Disabled . When this option is set
to Enabled , AMIBIOS supports a PS/2-type mouse.
Primary Display
The settings for this option are Absent, VGA/EGA, CGA 40x25, CGA
80x25 or Mono .
Password Check
This option enables the password check option every time the system
boots or the end user runs WinBIOS Setup. If Always is chosen, a user
password prompt appears every time the computer is turned on. If
Setup is chosen, the password prompt appears if WinBIOS Setup is
executed.
Boot to OS/2
If DRAM size is over 64 MB, set this option to Yes to permit AMIBIOS to
run with IBM OS/2. The settings are No or Yes .
Processor Serial Number
Intel included a serial number in their Pentium III/Pentium III Xeon Proces-
sors as a unique system identifier. Select
Enabled
to allow Processor's
Serial Number to be detected by the application software programs. For
privacy reasons, you can disable this setting to prevent the release of
this identifier. The settings for this option are
Enabled
or
Disabled
.
CPU Microcode Updation
This option allows the BIOS to update the CPU Microcode. The settings
for this option are Disabled and Enabled .
Internal Cache (L1 Cache)
This option is for enabling or disabling the internal cache memory. The
settings for this option are Disabled, WriteThru or WriteBack .
External Cache (L2 Cache)
This option is for enabling or disabling the external cache memory. The
settings for this option are
Disabled, WriteThru
or
WriteBack
.
Boot Up Num-Lock
Settings for this option are On or Off . When this option is set to On , the
be used as a warning tool, not as a tool to predict the device reliability.