Supero SUPER S2QE6, User Manual

Page: 39 / 92

Chapter 2: Installation
2-11
Installation
Fan Fail LED (FFL)
The Fan Fail LED connection is lo-
cated on pins 2 and 4 of JF1. See
Table 2-4 for pin definitions and
Figure 2-5 for pin locations.
Pin
N u m b e r
4
6
Definition
+ 5 V
G r o u n d
Table 2-4
Fan Fail LED
Pin Definitions
(JF1)
Power Supply Connectors
The S2QR6/S2QE6 has two pri-
mary power supply connectors: at
U21 and U23. You should connect
power to both of these two pri-
mary connectors. Each 20-pin
power connector can handle up to
9 amps maximum. See Table 2-1
for pin definitions.
Secondary Power Connector
Use of the secondary power con-
n e c t o r ( P W R _ S E C ) i s r e c o m -
mended when a heavy load of pe-
ripherals has been added to the
motherboard. This connector can
handle up to 5 amps maximum.
See Table 2-2 for pin definitions.
Note: Be sure to use a 6-pin connector and
check the power supply layout before attach-
ing it.
Table 2-2
Secondary Power Connector
(PWR_SEC)
Pin
N u m b e r
Definition
1 G r o u n d
2 G r o u n d
3 G r o u n d
4 + 3 . 3 V
5 + 3 . 3 V
6 +5V (keyed)
Power LED
The Power LED connection is lo-
cated on pins 1, 3 and 5 of JF1.
See Table 2-3 for pin definitions
and Figure 2-5 for pin locations.
Pin
N u m b e r
1
3
5
Definition
+ 5 V
K e y
G N D
Table 2-3
PWR_LED Pin
Definitions (JF1)
2-7 Connector Definitions
Table 2-1
ATX Power Supply Connector
Pin Definitions (U21, U23)
Pin Number Definition
1 3 . 3 V
2 3 . 3 V 3
3 G r o u n d
4 5 V
5 G r o u n d
6 5 V
7 G r o u n d
8 P W - O K
9 5 V S B
10 1 2 V
Pin Number Definition
11 3 . 3 V
12 - 1 2 V
13 G r o u n d
14 P S - O N
15 G r o u n d
16 G r o u n d
17 G r o u n d
18 - 5 V
19 5 V
20 5 V