Supero SUPER S2QE6, User Manual

Page: 40 / 92

2-12
S
UPER S2QR6/S2QE6 User's Manual
Installation
Power Fail LED (PFL)
The Power Fail LED connection is
located on pins 8 and 10 of JF1.
See Table 2-6 for pin definitions
and Figure 2-5 for pin locations.
Pin
N u m b e r
8
1 0
Definition
+ 5 V
G r o u n d
Table 2-6
Power Fail LED
Pin Definitions
(JF1)
PWR_ON
The PWR_ON connection is lo-
cated on pins 11 and 13 of JF1.
Momentarily contacting both pins
w i l l p o w e r o n / o f f t h e s y s t e m
(based on the power management
scheme of your operating sys-
tem). See Table 2-7 for pin defini-
tions and Figure 2-5 for pin loca-
tions.
Pin
N u m b e r
1 1
1 3
Definition
P W _ O N
G r o u n d
Table 2-7
PWR_ON Connector
Pin Definitions
(JF1)
NIC_LED
The Network Interface Controller
LED connection is located on pins
12 and 14 of JF1. This header is
used to display network activity.
See Table 2-8 for pin definitions
and Figure 2-5 for pin locations.
Table 2-8
NIC_LED Pin
Definitions
(JF1)
Pin
N u m b e r
1 2
1 4
Definition
+ 5 V
G N D
Table 2-5
IDE_LED Pin
Definitions
(JF1)
Pin
N u m b e r
7
9
Definition
+ 5 V
HD Active
IDE LED
The IDE Drive LED connection is
located on pins 7 and 9 of JF1.
This will send an indication of IDE
disk activity to the front control
panel. See Table 2-5 for pin defi-
nitions and Figure 2-5 for pin loca-
tions.