Superior spx 960 Instruction Manual For Operating And Maintenance Download Page 105

Page: 105 / 112

Istruction Manual for Operation and Maintenance

SPX-960

6.1 INSTRUCTIONS FOR ORDERING PARTS

Orders for machine parts must be requested from the company below:

SCAIP Srl
Via Roma, 18
43100 San Pancrazio (Parma) Italia
e-mail: [email protected]

The requests must be complete with the following data:

- Machine model and serial number.

This information is punched on the identi

cation plate with which

every machine is supplied (see Fig. 3 in section «1.3 Machine identi

cation»).

- Code of the part requested.

The code is indicated in the relevant page(s) of the Parts Book.

- Part description and quantity requested.

- Shipping terms.

If the applicant does not provide this detail, despite SCAIP’s commitment in the pro-

vision of this service, SCAIP srl will not be held responsible for possible shipping delays due to “force
majeure”. Shipping costs are intended at the Purchaser’s expense.

The goods are always shipped at the Purchaser’s risk, although it is sold free domicile (Incoterm

DDP).

The Manufacturer is always ready to help the purchaser should they have any requests for service
and/or parts

6-3

SPARE PARTS

Summary of Contents for spx 960

















































































































Search results

Summary of Contents for spx 960

Reviews:

Related manuals for spx 960

Brands by name

Popular brands

Superior spx 960, Instruction Manual For Operating And Maintenance

Search results

Summary of Contents for spx 960

Reviews:

Related manuals for spx 960

Brands by name

Popular brands