7
2.
Mark the Mounting Line on the Wall
a.
Measure up from the deck or patio floor on one side and make a mark at your desired Mounting Height
(9’ Recommended, should be at least 7’ 6”).
b.
Make a second mark 9” below the first mark. The space between these marks must be clear of
obstructions (light fixtures, etc.) along the entire length of the wall.
c.
Using a chalk line or a string, snap a level line on the lower mark for the length of the Awning. The
bottom of the Wall Brackets will rest on this lower line.
Note: For ease of mounting the Awning into the Brackets, it is very important that the line will be straight
and level.
For Mounting Height the Awning requires
9” of unobstructed area along the whole length of the Awning
House
6’6” Lowest Clearance at
9’ Mounting Height
Pitch
of 2’5” (29”)
(Recommended)
Mounting Height 9’
Deck
Fabric
Projection
Figure 3 - Example of Pitch and Projection
Overhang
Deck
Minimum Mounting Height 7’ 6”
Recommended Mounting Height is 9’
9” Minimum
Unobstructed
Area Required
Wall Brackets
Figure 2 - Example of a 9’ Mounting Height Installation
