4
Supplied Fasteners / Parts List
Note: All Awnings ship with one of the following types of Brackets and Mounting Hardware:
Soffit Bracket
14’ - 16’ : Qty 4
17’ - 20’ : Qty 6
Wall Bracket
14’ - 16’ : Qty 4
17’ - 20’ : Qty 6
Mounting Hardware Includes:
• Two 4” Lag Screws and
Flat Washers for each Wall
Bracket
• One Retaining Bolt Set for
each Wall Bracket
Mounting Hardware Includes:
• Two 4” Lag Screws and Flat
Washers for each Soffit Bracket
• One Retaining Bolt Set for each
Soffit Bracket
XL Extended Projection
Wall Bracket
14’ - 16’ : Qty 4
17’ - 20’ : Qty 6
Mounting Hardware Includes:
• One 4” Lag Screw and Flat
Washer for each Wall Bracket
(use 4” Lag Screw in top Bracket hole)
• One 5” Lag Screw and Flat
Washer for each Wall Bracket
(use 5” Lag Screw in bottom Bracket hole)
• One Retaining Bolt Set for
each Wall Bracket
1/2” Thick
1 1/4” Thick
6 mm Allen Wrench
Qty 1
Crank Wand
Qty 1
3/8” x 5” Lag Screw
(for Extended Projection Wall Bracket only)
14’-16’: Qty 4, 17’-20’: Qty 6
3/8” x 4” Lag Screw
(for all Brackets)
(
Note
: For Extended Projection Wall Bracket, half the number of
4” Lag Screws are replaced with 5” Lag Screws, as shown below.)
14’-16’: Qty 8, 17’-20’: Qty 12
3/8” Flat Washer
14’-16’: Qty 8
17’-20’: Qty 12
Lag Screws and Flat Washers
Use 5” Lag Screw in bottom Bracket hole
5/16” x 2-3/4”
Retaining Hex Bolt
5/16” Retaining Nut
5/16” Flat Washer
14’ - 16’: Qty 4
17’-20’: Qty 6
Retaining Bolt Set
