15
The Multi-Channel Remote Transmitter
Your Motorized Awning is programmed at the factory to respond to Channel 1 on the Multi-Channel Remote
Transmitter packaged with your Awning.
Each Channel on every Multi-Channel Remote Transmitter (see
Figure 19
) has a unique ID (identification code)
that allows your Remote to act as five (5) different Remote Transmitters.
The first LED light on the left is Channel 1
. Press and release the Channel Selector Button to display a blinking
LED Light on the active Channel.
To change the active Channel, press the Channel Selector Button while the LED light is blinking. The next
Channel LED light will blink, making that the active Channel. Repeat pressing the Channel Selector Button to
move from Channel 1 through Channel 5 (all 4 LEDs blink).
The Motor in your Awning can be programmed to respond to any or all of the 5 Channels of the Multi-Channel
Remote Transmitter.
The Programming Button inside the small opening on the back of the Remote Transmitter is
used to
ADD
or
DELETE
individual channels from the Motor’s memory.
1. To
ADD
a channel, such as Channel 2, 3, 4, or 5 to control the Motor:
a.
Activate Channel 1 of the Remote Transmitter.
b.
Press and Hold the Programming Button in the back of the Remote until the Awning
jogs or moves slightly.
c.
Press the Channel Selector Button to move the active Channel to the Channel you
want to use to control your Motorized Awning.
d.
Press and Hold the Programming Button in the back of the Remote until the Awning
jogs or moves slightly.
e.
This active Channel has been added to the Motor’s memory.
2. To
DELETE
a Channel that controls your Awning’s Motor:
a.
Select the Channel you wish to keep controlling your Awning’s Motor or LEDs.
b.
Press and Hold the Programming Button in the back of the Remote until the Awning
jogs or moves slightly (or LEDs blink).
c.
Press the Channel Selector Button to move the active channel to the channel you
want to delete from the control your Awning or LEDs.
d.
Press and Hold the Programming Button in the back of the Remote until the Awning
jogs or moves slightly (or LEDs blink).
e.
This active Channel has been DELETED from the Motor’s (or LED’s) memory.
Note: The steps to ADD are the same as DELETE. They simply “toggle” whether the Remote
controls the Motor or does not control the Motor.
Notes:
• Each Channel can be added to any number of different Motors, so one Multi-Channel Remote can control
multiple Awnings, independently.
• Multiple Channels or Remotes can be added to any one Motor. This way, the user can control the Awning
from more than one Channel, on the same or on more than one Multi-Channel Remote Transmitter.
• If only one Channel operates the Motor, this one Channel cannot be deleted from the Motor’s memory.
• Never use the same Channel to control your Motorized Awning and Dimming LED Light System. The
UP arrow will CLOSE your Awning, but will also TURN ON your Dimming LED Light System. SunSetter
recommends Channel 1 to operate the Awning and Channel 2 to operate your Dimming LED Light System.
• When programming multiple Motors and Remote Transmitters, always unplug all SunSetter products and
plug in ONLY the one particular product you wish to program for the Remote, at that time. This simplifies
the process and reduces errors regarding which Remote operates which product.
Figure 19
Programming
Button
LED
Channel
Indicator
Lights
Channel
Selector
Button
