Sunrise Internet Box Page 40 User Manual Download

Page: 40 / 162

Page 40

Sunrise Internet Box User Manual

File sharing settings

This service allows you to share the content of USB memory devices (key, etc.) with all users
connected to the Sunrise Internet Box. To do this, the user must copy the link indicated on the
screen into the browser address bar.

Field

Action

Default

value

File sharing

The

ON/OFF

button allows you to activate or

deactivate the File Sharing service on your
gateway.

OFF

USB Disk

Display/hide more information about the shared
content.

Share

The

ON/OFF

button allows you to activate or

deactivate access to the current USB memory.

OFF

•

The maximum supported capacity of the USB mass storage device

depends on the file system used in the device.

•

Several USB mass storage devices can be

connected to the Sunrise Internet Box and operated simultaneously.

•

Supported file systems are: FAT32 and NTFS.

Notes

Summary of Contents for Internet Box



































































































































































Search results

Summary of Contents for Internet Box

Reviews:

Related manuals for Internet Box

Brands by name

Popular brands

Sunrise Internet Box, User Manual

Search results

Summary of Contents for Internet Box

Reviews:

Related manuals for Internet Box

Brands by name

Popular brands