Sunrise Internet Box User Manual Download Page 25

Page: 25 / 162

Sunrise Internet Box User Manual

Page 25

Mark

Description

Here you will find the parameters to control and configure your Sunrise
Internet Box.

•

The menu

My Sunrise Internet Box

allows you to configure general

settings. For more information, consult the Section Device
configuration (see Sub-section 3.3).

•

The menu

Access Control

allows you to configure the security

settings. For more information, consult the Section Access Control (see
Sub-section 3.4).

•

The menu

Internet Connectivity

allows you to configure the

Internet connection settings. For more information, consult the
Section Internet Connection (see Sub-section 3.5).

The help button appears in the configuration menus.
To activate the contextual help, click on the field/item for which you want
information, and the help button will appear.

Summary of Contents for Internet Box



































































































































































Search results

Summary of Contents for Internet Box

Reviews:

Brands by name

Popular brands

Sunrise Internet Box, User Manual

Search results

Summary of Contents for Internet Box

Reviews:

Brands by name

Popular brands