Sunrise Internet Box User Manual Download Page 81

Page: 81 / 162

Sunrise Internet Box User Manual

Page 81

Field

Meaning

Connection type

The DHCP connection type

Addressing type

The Addressing type used. Either

“

Static

”

(Sunrise Internet Box

will always use the same IP-address to connect to the internet
provider) or

“

DHCP

”

(an IP range of addresses will be used to

connect to the Internet provider)

Here you can see the IPv4 address.

Mask

Here you can see the mask of the IPv4 address.

Gateway

Here you can see the gateway's IPv4 address.

DNS

Here you can see the DNS mode.

The above settings are for information only and cannot be changed on
this page.

•

In the

Internet Connectivity

menu, select

Basic

and then

IPv6

. The following screen opens:

Note

Summary of Contents for Internet Box



































































































































































Search results

Summary of Contents for Internet Box

Reviews:

Brands by name

Popular brands

Sunrise Internet Box, User Manual

Search results

Summary of Contents for Internet Box

Reviews:

Brands by name

Popular brands