Sunrise Internet Box User Manual Download

Page: 97 / 162

Sunrise Internet Box User Manual

Page 97

3.7.4

WPS

Objective:

This menu lets you access the WPS parameters for easy pairing with your wireless
clients.

•

In the

Wi-Fi xGHz

menu, select

WPS

. The following screen opens:

Field

Action

Enable WPS

Click on the

ON/OFF

button to activate or deactivate the WPS function.

Note

: When OFF, the WPS function via the Wi-Fi button on the Sunrise

Internet Box is also disabled.

Push button

To connect a device by using the WPS Push Button.
Press on

Wi-Fi-Protected setup

button on the Interface (or hold down

(more than 5s) the Wi-Fi button on the top of the Sunrise internet Box),
then on the WPS button of your device.

Summary of Contents for Internet Box



































































































































































Search results

Summary of Contents for Internet Box

Reviews:

Related manuals for Internet Box

Brands by name

Popular brands

Sunrise Internet Box, User Manual

Search results

Summary of Contents for Internet Box

Reviews:

Related manuals for Internet Box

Brands by name

Popular brands