No. 7, Road 12, Industrial Zone, Taichung City 407, Taiwan
Tel: 886-4-2359-1190 Fax: 886-4-2359-3409
[email protected] www.sunriseiw.com.tw
7
To connect the power cord
1)
Open the electric box.
2)
Remove the small panel under the electric box.
3)
Insert the power cord through the entrance hole on the base of machine, and
then through the base of electric box.
4)
Connect the three phase wires to the power terminal strip in the electric box.
5)
Also make sure to ground the machine properly.
6)
Check that the power cord surface is not damaged, scratched or cut during
installation.
7)
Reinstall the panel and close the electric box.
To check the correct rotation of the motor.
z
Remove the back cover.
z
Briefly start and stop the motor and check that the motor rotates in the same
direction as the arrow indicated on motor.
Improper rotation can severely
damage the pump.
z
To change the motor rotation, first make sure the power is disconnected, then
reverse any two of the three phases of the electrical power supply.
