No. 7, Road 12, Industrial Zone, Taichung City 407, Taiwan
Tel: 886-4-2359-1190 Fax: 886-4-2359-3409
[email protected] www.sunriseiw.com.tw
25
OPTIONAL TOOLING
The bending machine can be used with a variety of optional tooling including
various bending tool, punching, shearing, profile strengthening, and well as many
custom made tooling.
Depend on the tooling, the upper die set is fixed at the cylinder head block, and the
lower die set is fixed using one or combination of the ø83mm and ø58mm fixing
holes. The ø83mm fixing hole has a handle on the backside of the machine for lock
up the tool. After install the tooling, turn the handle to right to lock the tool. Lose
the handle to left before uninstall the tool.
Because this manual cannot cover all the possibility of the optional tooling, the user
should refer to the appropriate instruction for the specific tooling for installation,
operation, and maintenance.
