Li.ONESS Batteries
| Operation, Safety and Installation Manual
24
EN
After the successful communication establishment
between the display and the battery, the following
screen will be shown to the display (Picture 33):
Picture 34 shows the active errors of the battery:
7.4.3 Enable the Wi-Fi of the display
and communication box
The Li.ONESS system will start sending data to the
Glocal (Sunlight cloud platform) after the activation
of the Wi-Fi communication. The customer must
connect to the display’s Wi-Fi.
The following steps below describe the
synchronization process.
Connect to the wireless network (Oxygen-000520)
of the display with a Laptop.
To login, insert the secure key which is the WPA
key or the Wi-Fi password (depending on the
label of the display) written in the label of the
Display Telecommunication Box (see Picture 36).
Open the browser:
http://192.168.254.254
User:
admin
Password: The password is written on the label
of the box and depending on the label of the
display, could be the password after “admin” or
the password after “pass” (see Picture 40).
On/Off
Fast Slow
WAN: WiFi 50%
BATTERY INFO
PACK VOLTAGE:
PACK CURRENT:
BATTERY STATUS:
TEMPERATURE:
26.35V
-0.4A
63%
24.4C
07:53:05
BAT: Charge
BMS: Connected
On/Off
Fast Slow
WAN: No conn
BATTERY ERRORS
CMU COMM
ERROR
17:07:00
BAT: Charge
BMS: Connected
Picture 33
C
ompact display operating screen
Picture 34
Indicative error
Oxygen-000520
No Internet, secured
Properties
Disconnect
admin : 6a2DJbMTUA
serial : 105806000520
mac : 001D1C0F00EE
wpa key : ENISHACCEE
S/N
MAC
PASS
MTf3BX4b7R
WiFi
RYRAILKURR
184017000133
243F3000893C
Picture 35
Laptop Wireless network Tab
Picture 36
Different labels
