Operation, Safety and Installation Manual |
Li.ONESS Batteries
15
6.2 Li.ONESS System installation
Notes
- During installation, the Li.ONESS modules cannot be
lifted by using the front panel handles.
- Telescopic lift can be used for lifting / leveling the
Li.ONESS modules before inserting it to the sliding
rail set
- One Li.ONESS module must be inserted at a time,
starting from the bottom of the battery cabinet
As an example, the assembly of a 20kWh Li.ONESS
system is presented:
• Insert the Li.ONESS Module No 4 starting from the
bottom sliding rail set as shown below
• Insert the next Li.ONESS Module No 3 to the
second sliding rail set as shown below
• Insert the Li.ONESS Module No 2 to the third sliding
rail set
• Insert the final Li.ONESS Module No 1 to the fourth
sliding set of rails
Picture 17
Battery cabinet final assembly
Picture 19
Li.ONESS Module No 2
Picture 20
Li.ONESS Module No 1
Picture 18
Li.ONESS Module No 3
EN
