Operation, Safety and Installation Manual |
Li.ONESS Batteries
23
7.4 Display and communication box
The Li.ONESS batteries are equipped with
the Compact Display Telecommunication Box
(Picture 4).
7.4.1 Functions and use of the Compact
Display by Sunlight:
This display is connected permanently to the
battery via a 7pin cable.
The functionality of the Compact Display Box is
described below:
i. Communicates with the battery via Wi-Fi
and displays all the critical parameters of
the battery (i.e. alarms, temperature, battery
voltage, battery current, and SoC).
ii. Switching ON / OFF the battery from the
display and communication box. (To switch
off the battery the ON / OFF button must be
pressed continuously for two (2) seconds in
both cases)
iii. Sends to GLocal via Wi-Fi or 2G, 3G, 4G,
(whatever is available at the user’s premises)
all the parameters which are visible on the
user’s display.
7.4.2 Getting started with the Compact
Display Telecommunication Box
i. Switch on the Li.ONESS battery by pressing the
On/Off button of the control panel or from the
On/Off button of the display (Picture 31).
After 1 minute the following screen will appear
on the display (Picture 32).
EN
Picture 30
Compact display connection to PBT Unit
Picture 31
Compact display loading screen
On/Off
Fast Slow
Loading...
Picture 32
Compact display loading screen No 2
On/Off
Fast Slow
Waiting for BMS data
WAN:
06:34:33
BAT: No Conn
