Operation, Safety and Installation Manual |
Li.ONESS Batteries
17
6.3 Electrical connections
• Connect the positive (+) RED connection cables
provided starting from Li.ONESS Module No 4 and
move upwards to Li.ONESS Module No 3, No 2 and
No 1 respectively.
Be careful to connect all the positive (+) RED cables
to the positive (+) RED poles
• Connect the negative (-) BLACK connection cables
provided starting from Li.ONESS Module No 4 and
move upwards to Li.ONESS Module No 3, No 2 and
No 1 respectively.
Be careful to connect all the negative (-) BLACK
cables to the negative (-) BLACK poles
• The Battery system after the electrical cable
connection will be shown below
6.4 CAN Communication connections
• Install the CAN communication cables (Molex
connector / or RJ45 where applicable) with the
following sequence:
Li.ONESS System with Power Unit
• P.U. BATTERY COM (left side RJ45 connector)
connected to Li.ONESS Module No 1 BATTERY
COM IN (Left side RJ45 connector)
Li.ONESS System with PBT Unit (Where
applicable)
• PBT Unit BATTERY COM (left side RJ45 connector)
connected to Li.ONESS Module No 1 BATTERY
COM IN (Left side RJ45 connector)
Picture 24
Li.ONESS system electrical
connection
Picture 25
Li.ONESS P.U communication
connection to Li.ONESS Module 1
Picture 26
Li.ONESS PBT Unit communication
connection to Li.ONESS Module 1
EN
