Sungrow SG285HX, User Manual

Page: 119 / 128

109
8.3 Inverter Disposal
8.3.1 Dismantling the Inverter
Risk of burn injuries and electric shock!
After the inverter is powered off for 25 minutes, measure the voltage and current
with professional instrument. Only when there is no voltage nor current can opera-
tors who wear protective equipment operate and maintain the inverter.
Before dismantling the inverter, disconnect both AC and DC connections.
If there are more than two layers of inverter DC terminals, dismantle the outer DC
connectors before dismantling the inner ones.
step 1 Refer to " 5 Electrical Connection " , for the inverter disconnection of all cables in reverse
steps. In particular, when removing the DC connector, use an MC4-Evo2 wrench to loosen
the locking parts and install waterproof plugs.
step 2 Refer to " 4 Mechanical Mounting " , to dismantle the inverter in reverse steps.
step 3 If necessary, remove the wall-mounting bracket from the wall.
step 4 If the inverter will be used again in the future, please refer to " 3.3 Inverter Storage " for a
proper conservation.
- - End
8.3.2 Disposal of the Inverter
Users take the responsibility for the disposal of the inverter.
Please scrap the inverter in accordance with relevant local regulations and stand-
ards to avoid property losses or casualties.
User Manual 8 Troubleshooting and Maintenance