8
Step 9
Locate lamp harness and place on top.
To connect lamp harness to
pa
nel A terminate
harness to panel A cord 2 align plug and twist
clock wise until locked. Repeat procedure for
panel B cord 2, panel C cord 2 and door panel
cord.
(See Illustration 9)
Step 10
Locate panel A power cord 1 and connect with
panel A cord 1. To terminate panel A cord 1 to
power cord 1 align plug and twist clock wise until
locked. Repeat procedure for panel B cord 1 and
panel C cord 1.
(See Illustration 9)
Step 11
Locate top fan wires and connect to fan power wires
from Panel A to fan. Match connector to the corresponding
color.
(See Illustration 10)
Step 12
Remove plastic top cover from box and connenct the
three (3) 4 conductor phone cables from Panel A
to timer jack plate in plastic top cover. Secure top
cover to top of unit using four (4) 1/4 - 20 X 3/4 bolts.
(See Illustration 8)
Step 13
Remove one (1) ballast panel from box marked
“ballast”. To install ballast panel slide tabs of
ballast panel into slots at bottom of ballast
access. To avoid later service problems please
note that the interior harness is not trapped
between ballast panel inner booth structure.
Attach ballast panel to inner booth structure
with two (2) of the provided # 6 x 3/8 philips
screws tighten securely.
(
See
Illustration 10)
Step 14
Connect ballast to lamps by terminating the MTE/LK
male harness plug with the female ballast plug.
Repeat procedure for remaining ballast panels.
(Refer to Pages 25-27)
Assembly Instructions
Illustration 8
Illustration 9
Illustration 10
Summary of Contents for Radius 252
