Sun Microsystems STOREDGE A5000, Installation And Service Manual

Page: 63 / 146

Chapter 5 FPM Screens 5-11
5.10 GBICs
TABLE 5-2
GBIC Status
Status Definition
TXFault Transmitter status: failure.
The GBIC may be broken.
Online The GBIC is okay.
ByteSync Receiver status: there is byte sync, but the link is not online.
The host adapter or hub port may be broken
1
.
Signal Receiver status: there is light, but no sync (bad signal).
The host adapter or hub (or a GBIC in either) may be broken
1
.
No Signal Receiver status: no signal.
A GBIC in the host adapter, hub, or interface board is
probably broken.
1. Any broken component in the FC-AL loop can cause this error.
Disk View
Disk View
On/Off
button
GBIC status
Type of GBIC
Back screen
To install or replace a GBIC, see Section 7.2.3
“GBIC” on page 7-9.
Confirm screen
To next GBIC
(see table below)