Sun Microsystems STOREDGE A5000, Installation And Service Manual, Page: 135 / 146

Appendix D Firmware and Device Driver Error Messages D-9
The above message is displayed when the
socal
driver has detected some invalid
fields in a packet received from the host adapter. The cause of this is most likely
incorrectly functioning hardware (either the host adapter itself or some other SBus
hardware).
The above error messages may be displayed if the driver has detected an
inconsistency in the state of the machine. This may be the result of failed hardware,
such as the host adapter or SBus hardware.
The above messages indicate the presence of invalid fields in the Fibre Channel
frames received by the host adapter. This may indicate a non-Sun Fibre Channel
device in the Fibre Channel loop of a disk array. These messages can also be caused
by a failed host adapter, GBIC, or interface board.
socal.link.4060 socal #: invalid FC packet; in, out, seqno = 0x%x,
0x%x, 0x%x
socal.driver.4030 socal #: too many continuation entries
socal.link.3020 socal #: unknown status: 0x%x
socal.link.4050 socal #: unexpected state: flags: 0x%x
socal.link.4010 socal #: incomplete continuation entry
socal.link.4020 socal #: unsupported Link Service command: 0x%x
socal.link.4030 socal #: unknown FC-4 command: 0x%x
socal.link.4040 socal #: unsupported FC frame R_CTL: 0x%x