Sun Microsystems STOREDGE A5000, Installation And Service Manual

Page: 100 / 146

7-24 Sun StorEdge A5000 Installation and Service Manual • September 1999
10. Remove and replace the interconnect assembly (
FIGURE 7-21
).
a. Remove the four screws holding the assembly. See
FIGURE 7-21
.
b. Lift the assembly and set it aside.
FIGURE 7-21
Removing the Interconnect Assembly
11. Reverse Step 5 through Step 9 to reassemble the disk array.
12. Power on the disk array.
13. Use the FPM to reset the Loop Type, Box ID, and box name to the settings you
wrote down in Step 1.
Screw
Screw
Screw
Screw