Sun Microsystems STOREDGE A5000, Installation And Service Manual

Page: 47 / 146

Chapter 4 Rackmount Installation 4-7
4.3 Installing the Rails
Follow the instructions on preparing for service in your system or expansion cabinet
documentation. If necessary, be sure to:
■
Extend the stabilizer legs
■
Remove or open the top front panel
■
Remove or open the vented rear panel
1. Loosely thread in the two bottom screws on the left side of the cabinet
(
FIGURE 4-5
).
Install the screws as specified in the online Rackmount Placement Matrix.
FIGURE 4-5
Threading Screws Into the Cabinet
2. Place the left side rail in the cabinet. Align the open-slotted holes at the bottom of
the rail with the screws installed in Step 1.
3. Install the screws in the front and rear top rail holes.
Install the screws as specified in the online Rackmount Placement Matrix.
4. Tighten all four screws.
5. Repeat Step 1 through Step 4 for the right side rail.