Sun Microsystems STOREDGE A5000, Installation And Service Manual

Page: 35 / 146

Chapter 2 Tabletop Installation 2-3
2.3 Inspecting the Disk Array
1. Unpack the disk array.
2. Inspect the disk array for evidence of damage.
If damaged, keep all contents and packing materials for the shipping company’s
agent to inspect.
3. Save the packing materials for future use.
2.4 Installing the Disk Array
Installing the disk array involves connecting the power cord, adding additional
interface boards and GBICs if needed, and routing the fiber optic cables. Read this
section before beginning the installation.
2.4.1 Connecting the Power Cord
1. Make sure that the power switch for the disk array is off.
2. Connect the power cord to the AC connector on the rear panel of the disk array
(
FIGURE 2-1
).
FIGURE 2-1
AC Power Connector
AC power connector