Sun Microsystems STOREDGE A5000, Installation And Service Manual

Page: 137 / 146

Appendix D Firmware and Device Driver Error Messages D-11
The above message will be followed by one of the following messages filling in the
%s
string:
This transport error indicates that the driver or host adapter microcode has detected
a bit error condition. The associated I/O operation will fail. This messages should be
followed or preceded by other error messages; refer to these other error messages to
determine what action you should take to fix the problem.
This message means that the host adapter has failed and needs to be replaced as
soon as possible.
The above message indicates an Extended Loop Services (ELS) has encountered a
problem in the loop and has exhausted retry attempts. Common ELS values are:
■
0x0
Loosely translates to a SCSI inquiry command
■
0x3
Login
■
0x5
Logout
0x0
is usually referencing a host adapter or interface board, whereas
0x3
and
0x5
are typically found in conjunction with a disk drive.
sf #: Transport error on target=0x%x: %s
Fibre Channel CRC Error on frames
Fibre Channel: INCOMPLETE DMA XFER on sbus
sf #: ELS 0x%x to target 0x%x timed out