Sun Microsystems StorEdge 6320 System 1.0, Reference And Service Manual

Page: 99 / 176

Chapter 5 Sun StorEdge Configuration Service Software 5-29
TABLE 5-27
describes the arguments associated with the
delete initgroup
subcommand.
5.3.9.5 Removing an Initiator from an Initiator Group
Use this command to remove an initiator from an initiator group. The
sscs remove
initgroup
command-line syntax is shown below.
TABLE 5-28
describes the arguments associated with the
remove initgroup
subcommand.
5.3.10 Displaying Jobs, Logs, System Setting, and Array
Components
Use the
sscs
commands described in this subsections to list details about
outstanding or completed jobs, log files, system settings, and array components.
TABLE 5-27
sscs delete initgroup
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
initgroup
initgroup-name Specifies an initiator group by name. initgroup-name can be up
to 16 characters long.
# sscs remove -a
array-name
-i
wwn
initgrp
initgroup-name
TABLE 5-28 sscs remove initgroup
Command-Line Arguments
Argument Description
-a,--array
array-name Specify an array-name up to 40 characters long.
-i,--initiator
wwn Specify the device by its WWN. The wwn can be up to 16 hex
characters. For example,
-i 210000e08b047212
.
initgroup
initgroup-name Specifies an initiator group by name. initgroup-name can be up
to 16 characters long.