Sun Microsystems StorEdge 6320 System 1.0, Reference And Service Manual

Page: 100 / 176

5-30 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
5.3.10.1 Listing Disk Arrays
This command displays the details about one or more disk arrays. If you do not
specify an array-name, the command lists the disk array names and status only. The
sscs list array
command-line syntax is shown below.
5.3.10.2 Listing the Date and Time
This command displays the current date and time of the Storage Service Processor in
the following format:
day month day-number hour:minute:second timezone year
For example,
Thu Aug 22 16:09:36 PDT 2002
.
The
sscs list date
command-line syntax is shown below.
5.3.10.3 Listing the Firewall
This command displays current firewall port filter settings. The command lists the
indicated port as open (allowing traffic) or closed (disallowing traffic). The
sscs
list firewall
command-line syntax is shown below.
5.3.10.4 Listing the Initiator
This command displays information about one or more initiators. If you do not
specify a worldwide name (WWN), the command lists all initiators. The
sscs list
initiator
command-line syntax is shown below.
# sscs list array [
array-name1
,
array-name2
, ...]
# sscs list date
# sscs list firewall
# sscs list -a
array-name
initiator [
wwn1
,
wwn2
, ...]