Sun Microsystems StorEdge 6320 System 1.0, Reference And Service Manual

Page: 60 / 176

3-6 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
The Sun StorEdge 6020 array miscellaneous configuration parameters are shown in
TABLE 3-5
.
3.2.1 Sun StorEdge 6020 Array
syslog.conf
Configuration
To ensure that the Storage Service Processor monitors the condition of each Sun
StorEdge 6020 array tray within the systems, the arrays are configured to send their
syslog.conf
information back to the Storage Service Processor.
The information that is placed in each Sun StorEdge 6020 array is shown in the
following
/opt/T4_conf/etc/syslog.conf
file.
TABLE 3-5
Sun StorEdge 6020 Array Miscellaneous Configuration Parameters
Parameter Default Value
vol init rate = 16
vol verify rate = 1
port host sun
# syslog.conf
# facility.level action
# messages to local syslog file
*.info /syslog
# messages to syslogd on another host
*.notice @192.168.0.2
# messages sent as SNMP traps
# messages sent as HTTP pushes
*.info | http_push