Sun Microsystems StorEdge 6320 System 1.0, Reference And Service Manual

Page: 28 / 176

xxviii Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
Chapter 6 contains a brief overview of the functionality provided by the Storage
Automated Diagnostic Environment software that performs fault detection and
isolation on the Sun StorEdge 6320 systems.
Chapter 7 describes the steps required to service the field-replaceable units (FRUs) in
the system.
Chapter 8 presents general instructions about the placement of FRUs and how to
install and remove FRUs from the system.
Chapter 9 gives instructions for the removal and replacement of FRUs in the Sun
StorEdge Expansion Cabinets.
Chapter 10 discusses the removing and replacing the Ethernet hub.
Chapter 11 describes the procedures for removing and replacing the Sun StorEdge
network FC switch-16 switches.
Chapter 12 gives instructions for removing and replacing Sun StorEdge 6020 arrays.
Appendix A contains a set of tables that list the cable labels for the Sun StorEdge
6320 system and the Sun StorEdge 6320 (switchless) system.
Using UNIX Commands
This document may not contain information on basic UNIX
®
commands and
procedures such as shutting down the system, booting the system, and configuring
devices.
See one or more of the following for this information:
■
Solaris Handbook for Sun Peripherals
■
AnswerBook2™ online documentation for the Solaris™ operating environment
■
Other software documentation that you received with your system