Sun Microsystems StorEdge 6320 System 1.0, Reference And Service Manual

Page: 133 / 176

10-1
C H A P T E R
10
Servicing the Ethernet Hub
This chapter describes the removal and replacement of the Ethernet hub.
Note – Servicing the Ethernet hub in either the first or second cabinet does not
affect customer I/O. No software action is required when you perform service on the
Ethernet hubs.
This chapter is organized as follows:
■
“Servicing the Ethernet Hub Overview” on page 10-1
■
“Removing the Ethernet Hub From the First Cabinet” on page 10-2
■
“Replacing the Ethernet Hub in the First Cabinet” on page 10-3
■
“Removing the Ethernet Hub from the Second Cabinet” on page 10-4
■
“Replacing the Ethernet Hub in the Second Cabinet” on page 10-5
■
“Removing the Mounting Bracket in the Second Cabinet” on page 10-5
■
“Replacing the Mounting Bracket in the Second Cabinet” on page 10-6
10.1 Servicing the Ethernet Hub Overview
TABLE 10-1
lists the FRUs associated with the Ethernet hub:
TABLE 10-1
Ethernet Hub FRU List
FRU Description
Ethernet hub (with rackmount kit for first cabinet)
Ethernet hub (with rackmount kit for second cabinet)