Sun Microsystems StorEdge 6320 System 1.0, Reference And Service Manual

Page: 138 / 176

10-6 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
6. Moving from right to left, disconnect the cables.
7. Unscrew the four screws that hold the mounting bracket to the Sun StorEdge
Expansion Cabinet.
Note –
Make a note of the location where the mounting bracket was attached to the
Sun StorEdge Expansion Cabinet.
8. Unscrew the four screws (two on the left and two on the right) that secure the
Ethernet hub to the mounting bracket.
10.7 Replacing the Mounting Bracket in the
Second Cabinet
1. Assemble the new mounting bracket.
2. Connect the Ethernet hub to the new mounting bracket using the four screws (two
on the left and two on the right).
3. Screw the mounting bracket to the Sun StorEdge Expansion Cabinet in the same
location where the old bracket was connected.
4. Moving from left to right, reconnect all the cables to the Ethernet hub.
5. Connect the power cable into the Ethernet hub.
6. Close the mounting bracket and secure it with the two PEM fasteners.
7. Close the back door.