Sun Microsystems StorEdge 6320 System 1.0, Reference And Service Manual

Page: 85 / 176

Chapter 5 Sun StorEdge Configuration Service Software 5-15
5.3.4.1 Modifying the Network Addresses
Use this command to modify the network addresses of the Storage Service Processor.
The
sscs modify net
command-line syntax is shown below.
TABLE 5-7
describes the arguments associated with the
modify net
subcommand.
5.3.4.2 Modifying the Network Time Protocol Server
Use this command to modify or disable the Network Time Protocol (NTP) server IP
address with the following arguments and options.
The sscs modify ntp command-line syntax is shown below:
# sscs modify -n
ip-address {
-d
{
on | off
}
| -i
ip-address
-g
ip-address
-m
ip-address }
net
TABLE 5-7
sscs modify net
Command-Line Arguments
Argument Description
-n,--nameserver
ip-address
Specifies the domain name server (DNS) IP address.
-d,--dhcp {on | off}
Specifies
on
if the Storage Service Processor gets its network
addresses from a DHCP server.
-i,--ipaddress
ip-address
Specifies the Storage Service Processor IP address. Use if
-d,
--dhcp
is
off
.
-g,--gateway
ip-address Specifies the gateway IP address. Use if
-d,
--dhcp
is
off
.
-m,--netmask
ip-address Specifies the gateway IP address. Use if
-d,--dhcp
is
off
.
#
sscs modify
[
-d
|
-e
ip-address
]
ntp
[
ip-address
]