Sun Microsystems StorEdge 6320 System 1.0, Reference And Service Manual

Page: 103 / 176

Chapter 5 Sun StorEdge Configuration Service Software 5-33
5.3.10.10 Listing the Network Time Protocol
This command shows Network Time Protocol IP address. The
sscs list ntp
command-line syntax is shown below.
5.3.10.11 Listing the Storage Pools
This command displays information about one or more storage pools. If you do not
specify a pool name, the command shows all pool names. The
sscs list pool
command-line syntax is shown below.
5.3.10.12 Listing the Power Status
This command displays the power status for the array. The command shows the
status of ON, UNKNOWN, or DOWN (DOWN indicates that the array is powered
down). The
sscs list power
command-line syntax is shown below.
5.3.10.13 Listing the Storage Service Processor Information
This command displays the system Storage Service Processor information, such as
system ID, description, and vendor and model type. The
sscs list system
command-line syntax is shown below.
# sscs list ntp
# sscs list pool
[pool-name1, poolname2,...]
# sscs list power
# sscs list system