Chapter 2: Installing the Server in a Rack
2-8
User Guide—Sun Cobalt LX50 Server
Install Chassis in Rack
1.
With the chassis front facing you, lift the chassis and position the chassis disks (Figure 7, A) so they fit in the rear
brackets (B).
Figure 7.
Installing the Chassis in the Rear Brackets
A. Chassis disk
B. Rear bracket
2.
Slide the chassis toward the rear of the rack until the front of the chassis brackets contact the front posts.
3.
Attach the chassis brackets (Figure 8, A) to the front posts (B) using two screws (C) and one nut bar (D) per side.
!
Caution:
Lifting the chassis and attaching it to the rack is a two-person job. If needed, use an
appropriate lifting device. A fully loaded server weighs approximately 11.8 kg (26 lbs).
B
A
Summary of Contents for Cobalt LX50
