Chapter 2: Installing the Server in a Rack
2-10
User Guide—Sun Cobalt LX50 Server
Install Chassis Handles
1.
Slide a handle (Figure 9, A) between the chassis and the chassis bracket.
2.
Align the hole in the handle with the unused hole in the chassis bracket.
3.
Install a spacer (B) between the handle and the chassis bracket.
4.
Install and tighten screw (C) to secure the handle.
5.
In the same manner, attach the other handle to the opposite side.
6.
Replace the bezel.
You have completed the installation of your chassis in a four-post rack system.
Figure 9.
Attaching a Chassis Handle to a Front Post
A. Chassis handle
B. Spacer
C. #10-32 x 7/8-inch screw with washer
✍
Note:
The handles are required to hold the bezel on. If you will not be installing a bezel, you do
not need to install the handles.
A
C
B
Summary of Contents for Cobalt LX50
