Sun Microsystems Cobalt LX50, User Manual

Page: 81 / 138

Using the Service Partition Menu
User Guide—Sun Cobalt LX50 Server 4-23
Comprehensive Test
This test fully exercises and tests the server system. The test takes approximately 15 to 20 minutes to execute,
depending on the amount of memory installed. The following test modules are run during the Comprehensive Test:
• Power On Self Test
• CPU Test(s)
• Cache Memory Test(s)
• Math Coprocessor Test(s)
• Symmetric Multiprocessing (SMP) Processor 0
• Symmetric Multiprocessing (SMP) Processor 1
• DIMM Memory Test
• Serverworks HE-SL Chipset Test
• Primary Interrupt Controller Test
• Programmable Interrupt Timer Test
• Keyboard Test
• Hot Swap Controller Test
• Real Time Clock Test
• PCI Bus Controller Test
• Universal Serial Bus Controller Test
• Super I/O Controller Test
• DMA Controller Test
• Baseboard Management Controller Test
• Comm Port 1 Controller Test
• Comm Port 2 Controller Test
• Adaptec SCSI Controller Test
• Parallel Port Controller Test
• Floppy A Controller Test
• ATI Video Adapter Test
• CD-ROM Controller Test
• Hard Disk Drive Controller and Drives Test
To run the Comprehensive Test, follow this procedure:
1. Select Comprehensive Test using the arrow keys and press Enter.
The initial testing determines your server configuration, and produces screens similar to those shown in
Figure 50, Figure 51, and Figure 52.
2. When you are prompted about the configuration of the server, if the hardware configuration does not match the
configuration of your server, press the Ctrl and Break keys simultaneously.
You are prompted to check all the cables and your server configuration, then you are exited to the Platform
Confidence Test main menu.