Chapter 2: Installing the Server in a Rack
2-18
User Guide—Sun Cobalt LX50 Server
Install Chassis in Rack
1.
Locate one person at the front of the rack and one at the rear.
2.
Position the chassis so that the L brackets (Figure 17, A) are inserted into the chassis mounting brackets (B).
3.
While supporting the weight of the chassis, adjust the L brackets to fit tightly into the chassis brackets (C).
Figure 17.
L Brackets Inserted into Chassis Mounting Brackets (Rear View)
4.
Slide the chassis toward the rear of the rack until the front of the chassis brackets contact the front of the center
posts.
5.
Using the fasteners (Figure 18, C) supplied with your rack, attach the front of the mounting brackets to the front
of the center posts.
!
Caution:
Lifting the chassis and attaching it to the rack is a two-person job. If needed, use an
appropriate lifting device. A fully loaded server weighs about 11.8 kg (26 lbs).
B
A
C
Summary of Contents for Cobalt LX50
