Chapter 4: Powering On and Configuring the Server
4-16
User Guide—Sun Cobalt LX50 Server
Quick Test
This test performs a quick test of the CPU(s), DIMM memory, CPU cache memory, and hard disk drives. It is not a
complete test of these units.
Quick Test takes from 2 to 5 minutes, depending on the amount of DIMM memory installed. The following test
modules are run during Quick Test:
•
Power On Self Test (POST)
•
CPU Test(s)
•
Symmetric Multiprocessing (SMP) Processor 0 Test
•
Symmetric Multiprocessing (SMP) Processor 1 Test
•
Hard Disk Drive Test(s)
•
Cache Memory Test(s)
•
DIMM Memory Test
To run the Quick Test, follow this procedure:
1.
Select Quick Test using the arrow keys and press Enter.
The initial testing produces a screen similar to the one shown in Figure 50. This phase of the testing determines
your server configuration.
Figure 50.
Platform Confidence Quick Test (first screen)
More screen entries appear as the test progresses. Eventually the screen shown in Figure 51 appears.
Summary of Contents for Cobalt LX50
