Installing the Server Using the Bracket Kit
User Guide—Sun Cobalt LX50 Server
2-7
Attach Brackets to Rear Posts
1.
Attach a nut bar (Figure 6, B) on the inside of the two rear rack posts using screws (A). Do not completely
tighten the screws—leave them loose enough to allow insertion of the brackets in step 2.
2.
Insert the slotted foot of a rear bracket (C) between each nut bar and post.
3.
Align the face of the bracket foot with the edge of the rack post and firmly tighten the screws.
Figure 6.
Attaching a Rear Bracket to a Rear Post
A. #10-32 x 1/2-inch screw with washers
B. Nut bar
C. Rear bracket
B
C
A
Summary of Contents for Cobalt LX50
