Subaru Legacy Outback 2006, Owner'S Manual

Page: 96 / 456

Keys and doors
2-11
– CONTINUED –
3. Remove the old battery.
4. Fit a new battery (type CR-1620 3V or
equivalent) in the case with its positive (+)
side facing upward.
5. Put the case together by fitting the mat-
ing part of the button side into the hook on
the key side.
6. Reinstall the screw on the transmitter
case.
T
B type
1. Remove the screw on the transmitter
case.
2. Separate the case.
1) Negative (–) side facing up
3. Remove the old battery.
4. Fit a new battery (type CR-1620 3V or
equivalent) in the case with its negative (–
) side facing upward.
5. Put the case together by fitting the mat-
ing part of the button side into the hook on
the key side.
6. Reinstall the screw on the transmitter
case.
y
Do not let dust, oil or water get on
or in the transmitter when replac-
ing battery.
y
Be careful not to damage the
printed circuit board in the trans-
mitter when replacing the battery.
200241
y
Be careful not to allow children to
touch the battery and any re-
moved parts; children could swal-
low them.
200392
y
Do not let dust, oil or water get on
or in the transmitter when replac-
ing battery.
1
200862