Subaru Legacy Outback 2006, Owner'S Manual

Page: 209 / 456

5-42
Audio
tery replacement, all stations stored in
the preset buttons are cleared. In this
case, it is also necessary to preset the
desired stations again.
V
Preset scan
The radio receives each memorized pre-
set station (frequency) for 10 seconds. To
start a preset scan, press the “SCAN” but-
ton during radio reception. To stop the
preset scan, press the “SCAN” button
again.
T
Local seek function
You can turn the local seek function on or
off during FM or AM reception by pressing
the “LOCAL” button.
„
Cassette operation
NOTE
y
Only use good-quality cassettes.
(Cassettes longer than C-90 are not
recommended.)
y
Put cassettes back in their boxes im-
mediately after use to protect them
from dust and dirt and to prevent the
tape from unwinding.
y
Never expose cassettes to heat, di-
rect sunlight or moisture.
y
Clean the tape head once or twice a
month using a wet-type cleaning cas-
sette .
T
To play a cassette
V
When a cassette is not in the player
Insert a cassette into the player. Once the
cassette is partially inserted, the player
will automatically draw it inside and start
playing it.
V
When a cassette is in the player
Press the “TAPE” button. The display will
show “PLAY”, and the player will start
playback.
V
Tape travel indicators
These indicate the direction in which the
cassette tape is moving.
: indicates that the top side of the cas-
sette is being played.
500071
LOCAL
500072
500055