Subaru Legacy Outback 2006, Owner'S Manual

Page: 344 / 456

In case of emergency
9-15
– CONTINUED –
sert it into the gap between the cover and
the front bumper, and use it to lever the
cover open.
3. Pull the entire front fog light cover to-
ward you.
4. Pull the towing hook cover toward you
to remove it.
5. Screw the towing hook into the thread
hole until its thread becomes invisible.
6. Tighten the towing hook securely by a
wheel nut wrench.
After towing, remove the towing hook from
the vehicle and stow it in the tool bag.
Fit the front fog light cover and towing
hook cover on the bumper.
Rear towing hook:
600138
600139
600140
y
Do not use the towing hook ex-
cept when towing your vehicle.
y
Be sure to remove the towing
hook after towing. Leaving the
towing hook mounted on the vehi-
cle could interfere with proper op-
eration of the SRS airbag system
in a frontal collision.
600150