Subaru Legacy Outback 2006, Owner'S Manual

Page: 193 / 456

5-26
Audio
NOTE
During the adjustment process, the audio set will return to the previous control
mode if you press the “TONE/BAL” button for one second (or longer) or do not
press the “TONE/BAL” button for a period of five seconds.
Mode Range of levels
(displayed)
BASS –8 to +8 Low frequencies attenuat-
ed Low frequencies empha-
sized
MIDDLE –8 to +8 Midrange frequencies at-
tenuated Midrange frequencies em-
phasized
TREBLE –8 to +8 High frequencies attenuat-
ed High frequencies empha-
sized
BALANCE L9 to R9 Right channel attenuated Left channel attenuated
FADER R9 to F9 Front attenuated Rear attenuated
V
Tone setting
The initial (factory-set) tone setting in ve-
hicles is optimized for listening in a Station
wagon. It is possible to change the tone
setting to one optimized for listening in a
Sedan by taking the following steps:
1. Press the “ON/VOL” button to turn the
power OFF.
2. Hold down the “TONE/BAL” button and
press the “ON/VOL” button to change the
setting. The setting will change from Sta-
tion wagon sound to Sedan sound. To re-
turn the setting to Station wagon sound,
perform steps 1 and 2 again. The setting
will be shown on the display.
T
FM/AM selection button
WAGON SOUND SEDAN SOUND
500063