Subaru Legacy Outback 2006, Owner'S Manual

Page: 417 / 456

11-60
Maintenance and service
„
Rear combination lights
T
Sedan
1. Use a screwdriver to give the knob at
the top of the rear combination light cover
a quarter of a turn clockwise or counter-
clockwise. Push the knob at the bottom of
the cover to open the cover.
1) Tail light/Stop light
2) Tail light
3) Rear turn signal light
4) Backup light
5) Rear fog light
6) Stop light
2. Remove the bulb holder from the rear
combination light assembly by turning it
counterclockwise.
3. Pull the bulb out of the bulb holder and
replace it with a new one.
4. Set the bulb holder into the rear combi-
nation light assembly and turn it clockwise
until it locks.
5. Securely lock the cover against the
trunk trim by using the screwdriver to turn
the top knob clockwise.
T
Station wagon
1. Using a Phillips screwdriver, remove
the upper and lower screws.
2. Wrap tape around a flat-head screw-
driver, then insert the screwdriver into the
700071
1, 2
3
5, 6
4
B00442
B00134
3
2
1
B00438