Subaru Legacy Outback 2006, Owner'S Manual

Page: 43 / 456

1-18
Seat, seatbelt and SRS airbags
0
1. Remove the connector (tongue) plate
from the belt holder located at the front of
the recess by pulling the connector
(tongue) plate rearward.
2. Pull out the seatbelt slowly.
Fastening the seatbelt with the web-
bing twisted can increase the risk or
severity of injury in an accident.
When fastening the belt after it is
pulled out from the retractor, espe-
cially when inserting the connec-
tor’s tongue plate into the mating
buckle (on right-hand side), always
check that the webbing is not twist-
ed.
100108
Be sure to fasten both tongue plates
to the respective buckles. If the
seatbelt is used only as a shoulder
belt (with the connector’s tongue
plate not fastened to the connec-
tor’s buckle on the right-hand side),
it cannot properly restrain the wear-
er in position in an accident, possi-
bly resulting in serious injury or
death.
100109 200296
200297