Subaru Legacy Outback 2006, Owner'S Manual

Page: 175 / 456

5-8
Audio
Press the “BAND” button to select the de-
sired waveband. Each time you press the
button, the waveband will change to the
next one in the following sequence. The
selected waveband will be shown on the
display.
T
Stereo indicator
The display shows the stereo indicator
“ST” when an FM stereo broadcast is re-
ceived.
T
Manual tuning (TUNE)
Push the tuning button marked “ ” to in-
crease the tuning frequency, and press
the tuning button marked “
” to de-
crease it.
Each time the button is pressed, the fre-
quency changes 0.05 MHz in the FM
mode, 9 kHz in the MW mode and 1 kHz
in the LW mode.
Constant pressure on the button causes a
continuous change in the frequency.
V
Seek tuning (SEEK)
Push the tuning button for at least a
half second.
The radio will seek the next available sta-
tion and stop on it. Repeat this operation
until you find the desired station.
T
Selecting preset stations
Presetting a station with a preset button
allows you to later select that station in a
single operation. Up to six FM1, FM2,
FM3, MW and LW stations each can be
preset.
T
How to preset stations
V
Manual preset
0
1. Press the “BAND” selection button to
select FM1, FM2, FM3, MW or LW recep-
tion.
FM1 FM2 LW FM3
MW
TUNE
TRACK
500049
1 2 3
4
5 6
500050
500048